Samsung PROSTAR

Should it ever become necessary to change the date and time displayed on all of the keysets, do it as soon as you notice that they are incorrect? Automatic Night Service will not work correctly and SMDR records will be of no value when the date and time are not correct.

The Display Format is the Following

W (Day of the week): Enter O for Saturday

MM (Month): Enter 01 for January and 12 for December

DD (Day of the month): Enter a number in the range of 01 – 31

YY (Year): Enter the last two digits of the year

HH (Hours): Use the 24-hour clock and enter a number in the range of 00-24

MM (Minutes): Enter a number in the range of 00-59

Failure to enter the time using the 24-hour clock v.i/1 cause the date to change a 12:00 pm Open customer programming and follow the instructions below

Press TRSF and then dial 505 Display will show OLD: 6010184:0047 NEW:

WMMDDYY: HHMM

Enter the new time and date using the above format

Verify the time and date and re-enter them if necessary

Press TRSF to store and exit programming or press SPK to store and advance to next program

If you have entered invalid data, you will receive an [INVALID ENTRY] message for three seconds. Re-enter the correct date and time. If the information you entered is incorrect again, repeat the procedure.

Samsung PROSTAR 816

To Enable Customer Programming

With the handset on-hook, dial ‘#06’. The display shows [MMC DISABLED].

Dial the passcode and ‘1’ then dial’#’

Password 4321

At this point, the customer programming is open

 Setting the Time and Date

After you have enabled customer programming, you may begin the following steps:

Dial ‘#55’. Display shows [YY MM DD HH MM]

Dial new information as follows:

YY = Last two digits of the year

MM= Month (01 – 12)

DD = Day of the month (01 – 31)

W = Day of the week (1 -7 day of the week begins on Monday & ends on Sunday)

HH = Hour (Use 24 hour clock)

MM = Minutes (0-59)

Dial ‘#’ to set current time & date. The phone returns to normal use

Samsung PROSTAR 56 | 120

Before any programs can be accessed, you must first open system programming using the passcode you have been assigned. This must be done using an 824 display keyset.

While on-hook dial ‘#20’
The display shows OPEN SYSTEM PGM – ENTER CODE: Display four digits passcode (1234).
The display shows OPEN SYSTEM PGM -CLOSED
Press the MUTE key. The display shows OPEN SYSTEM PGM – OPENED Press’#’. Keyset returns to idle condition.
Now press ‘#’ and two digit program code you want to access. Follow the instructions for that program
Note: You must begin programming within 60 seconds. Once in programming, any delay of more than 60 seconds between keystrokes will cause the system to automatically close programming.
Should it ever become necessary to correct date and time displayed on all the keysets, do so as soon as it is noticed that it is incorrect? Traffic reports and SMDR records will be of no value when the date and time are not correct.

Display Format:
W (Day of the week): Enter O for Saturday
MM (Month): Enter 01 for January and 12 for December
DD (Day of the month): Enter a number in the range of 01 -31
YY {Year): Enter the last two digits of the year
HH (Hours): Use the 24-hour clock and enter a number in the range of 00-24
MM (Minutes):
Enter a number in the range of 00-59

Note: Failure to enter time in 24-hour clock will cause the date to change at 12:00 noon

First open customer programming
ACTION
Dial ‘#70’ Display Shows SET CURRENT TIME YY MM/DD W HH: MM
Enter current date & time, e.g., 3:15 pm, Mon Jan 6th, 1992 SET CURRENT TIME 92 01/06 1 15:15
Press ‘#’ to store and exit W you entered invalid data, you will receive the [INVALID ENTRY] message for three seconds.
Re-enter the correct date and time. Should the information that you entered be incorrect, repeat the procedure

Samsung PROSTAR 1224

Before any programs can be accessed, you must first open system programming using the passcode you have been assigned. This must be done using an 824 display keyset.

While on-hook dial ‘#20’ Display shows OPEN SYSTEM PGM – ENTER CODE:

Display four digits passcode (1234). The display shows OPEN SYSTEM PGM -CLOSED

Press the MUTE key. The display shows OPEN SYSTEM PGM – OPENED

Press ‘#’. Keyset returns to idle condition.

Now press ‘#’ and two digit program code you want to access.

Follow the instructions for that program

Note: You must begin programming within 60 seconds. Once in programming, any delay of more than 60 seconds between keystrokes will cause the system to automatically close programming.

Should it ever become necessary to correct date and time displayed on all the keysets, do so as soon as it is noticed that it is incorrect? Traffic reports and SMDR records will be of no value when the date and time are not correct.

Display Format:

W (Day of the week): Enter O for Saturday

MM (Month): Enter 01 for January and 12 for December

DD (Day of the month): Enter a number in the range of 01 – 31

YY (Year): Enter the last two digits of the year

HH (Hours): Use the 24-hour clock and enter a number in the range of 00-24 MM (Minutes): Enter a number in the range of 00-59

Note: Failure to enter time in the 24-hour clock will cause the date to change at 12:00 noon First open customer programming.

ACTION

Dial ‘#70’ Display Shows SET CURRENT TIME YY MM/DD W HH: MM

Enter current date & time, e.g., 3:15 pm, Mon Jan 6th, 1992 SET CURRENT TIME 92 01/06 1 15:15

Press ‘#’ to store and exit